Microsoft MCSA Certification Exam 070-086
Implementing and Supporting Systems Management Server 2.0
QUESTION 61
Your network has 50 Microsoft Windows NT server computers. You use a single SMS site to manage the network. You want to use the SNMP Event to Trap Translator to send SNMP messages to an SNMP manager whenever a critical error occurs on any of the server computers.
What should you do?
A.Install the SNMP Service on each of the server computers. Configure the SNMP Event to Trap Translator on the site server.
B.Install the SNMP Service on each of the server computers. Configure the SNMP Event to Trap Translator on each of the server computers.
C.Install the SNMP service on the site server. Configure the SNMP event to Trap Translator on each of the server computers.
D.Install the SNMP Trap Receiver on each of the server computers. Configure the SNMP Event to Trap Translator on the site server.
Answer: A
QUESTION 62
You want to use Health Monitor to monitor a Microsoft Windows NT workstation computer on your network. The workstation is not a member of your SMS site and no SMS client software installed.
What must you do on the workstation?
A.Install the SNMP service.
B.Install the Health Monitor agent.
C.Install the Health Monitor console.
D.Add the SMS service account to the Administrators group.
E.Grant the SMS client console remote installation account the right to log on as a service.
Answer: B
QUESTION 63
You are using Health Monitor to monitor a Microsoft Windows NT server computer on your network. Health monitor reports the status of components on the server computer as shown in the following table:
Physical disk 0.00 100.00
What is the most likely cause of the values reported for the physical disk?
A.The Ftdisk.sys driver had failed.
B.NTFS cluster remapping has occurred.
C.A disk has no available free space.
D.Disk performance counters are not enabled.
E.A member of a hardware-based RAID array has failed.
Answer: D
QUESTION 64
You use the SMS administrator console to establish remote control access to a Microsoft Windows NT Workstation computer. However, you are unable to connect to the workstation. You verify that the SMS Remote Tools Client Agent is started on the workstation. You verify that the SMS Remote Tools Client Agent is started on the workstation. From a command line, you can successfully ping the workstation by using its NetBIOS name.
What is the most likely cause of the problem?
A.The workstation resides on a remote subnet.
B.The workstation is not configured with an LMHOSTS file.
C.The workstation is not configured with the address of a WINS server.
D.The Remote Tools Client Agent on your computer is configured to use a protocol that is not installed on the workstation.
E.The Remote Tools Client Agent on the workstation is configured to use a protocol that is not installed on your computer.
Answer: C
QUESTION 65
One of the distribution point computers in your SMS site fails. You replace its hard disk. You reinstall Microsoft Windows NT server with the same configurations that were in effect before the computer failed. You want to restore the distribution point computer so that it functions as it did before it failed.
What should you do?
A.Copy the backup of the master site control file to \Sms\Inboxes\Sitectrl.box\Sitectrl.ct0 on the distribution point computer.
B.Restore the SMS site database to the condition it WAN in before the distribution point computer failed.
C.Choose the option to refresh the packages that were previously created on the distribution point computer.
D.Do nothing. The site server will automatically rebuild the distribution point computer.
Answer: C
QUESTION 66
You create a package to install a custom application. You verify that the package has been distributed to three different distribution points within your SMS site. You then create advertisement for the package that targets a collection. A user attempts to run an advertisement program and the program fails to run.
What is the most likely cause of the problem?
A.The advertisement has been scheduled to run at a future time.
B.The Advertised Programs Client Agent has not been enabled for the site.
C.The user's account or client computer is not a member of the specified collection.
D.A package access account that restricts the user from accessing the package has been specified for the package.
Answer: D
QUESTION 67
You install software metering on Certkiller 's single primary site server. You review the Software Metering Summary. You discover that employees are playing computer games during working hours. You register the computer games by using the Software Metering tool. You enter 0 as the number of licenses. You enable Force real-time license verification. You later find out that the games are still being played. You want to ensure that employees cannot play the computer games during working hours.
Which two actions should you take? (Choose two)
A.Decrease the configuration polling interval used by the software Metering Client Agent.
B.Use Remote Tools to delete the computer game's executable files from the client computers.
C.Run the systems Management program to repair the SMS installation for the client computers that are playing the computer games.
D.Enable Original program name policy in the software metering properties for the site.
E.Enable Enforce the license limits for this product in the registered properties for each computer game.
Answer: D, E
QUESTION 68
You notice that inventory data from a secondary site is not being saved to the SMS database in the primary site. You are diagnosing the problem.
In which sequence should you examine the servers?
A.Distribution point in the secondary site
Secondary site server
Primary site server
B. Secondary site server
Client access point in the secondary site
Primary site server
C.Client access point in the secondary site
Secondary site server
Primary site server
D.Client access point in the secondary site
Distribution point in the secondary site
Secondary site server
Primary site server
Answer: B
QUESTION 69
You want to increase the throughput of site-to-site communications for your SMS site by adding a second Asynchronous RAS Sender. You attempt to install a second instance of the Asynchronous RAS Sender on the site server. You receive an error message.
What should you do?
A.Modify the registry on the site server.
B.Install an Asynchronous RAS sender on another server in your site.
C.Change the schedule of the Asynchronous RAS Sender on the site server.
D.Create a second address for the Asynchronous RAS sender on the site server.
Answer: B
QUESTION 70
Certkiller 's network consists of a single subnet. The accounting department has a small Microsoft Windows for Workgroups peer-to-peer network that uses TCP/IP-32. The Windows for Workgroups computers are not part of your primary site. You want to install SMS client software on all Windows for Workgroups computers. You enable Network Discovery from the site server computer. However, the SMS client software is not installed.
What must you do to correct the problem?
A.Enable Windows NT Remote Client Installation.
B.From a logon point in your primary site, install the SMS client software manually by running the Smsman.exe file.
C.From a logon point in your primary site, install the SMS client software manually by running the Smsman16.exe file.
D.From the site server computer, add one of the Windows for Workgroups computers as a logon point in Windows Networking Logon Client Installation.
E.From the site server computer, add one of the Windows for Workgroups computers as a logon point in Windows Networking Logon Discovery.
Answer: C
Implementing and Supporting Systems Management Server 2.0
QUESTION 61
Your network has 50 Microsoft Windows NT server computers. You use a single SMS site to manage the network. You want to use the SNMP Event to Trap Translator to send SNMP messages to an SNMP manager whenever a critical error occurs on any of the server computers.
What should you do?
A.Install the SNMP Service on each of the server computers. Configure the SNMP Event to Trap Translator on the site server.
B.Install the SNMP Service on each of the server computers. Configure the SNMP Event to Trap Translator on each of the server computers.
C.Install the SNMP service on the site server. Configure the SNMP event to Trap Translator on each of the server computers.
D.Install the SNMP Trap Receiver on each of the server computers. Configure the SNMP Event to Trap Translator on the site server.
Answer: A
QUESTION 62
You want to use Health Monitor to monitor a Microsoft Windows NT workstation computer on your network. The workstation is not a member of your SMS site and no SMS client software installed.
What must you do on the workstation?
A.Install the SNMP service.
B.Install the Health Monitor agent.
C.Install the Health Monitor console.
D.Add the SMS service account to the Administrators group.
E.Grant the SMS client console remote installation account the right to log on as a service.
Answer: B
QUESTION 63
You are using Health Monitor to monitor a Microsoft Windows NT server computer on your network. Health monitor reports the status of components on the server computer as shown in the following table:
Physical disk 0.00 100.00
What is the most likely cause of the values reported for the physical disk?
A.The Ftdisk.sys driver had failed.
B.NTFS cluster remapping has occurred.
C.A disk has no available free space.
D.Disk performance counters are not enabled.
E.A member of a hardware-based RAID array has failed.
Answer: D
QUESTION 64
You use the SMS administrator console to establish remote control access to a Microsoft Windows NT Workstation computer. However, you are unable to connect to the workstation. You verify that the SMS Remote Tools Client Agent is started on the workstation. You verify that the SMS Remote Tools Client Agent is started on the workstation. From a command line, you can successfully ping the workstation by using its NetBIOS name.
What is the most likely cause of the problem?
A.The workstation resides on a remote subnet.
B.The workstation is not configured with an LMHOSTS file.
C.The workstation is not configured with the address of a WINS server.
D.The Remote Tools Client Agent on your computer is configured to use a protocol that is not installed on the workstation.
E.The Remote Tools Client Agent on the workstation is configured to use a protocol that is not installed on your computer.
Answer: C
QUESTION 65
One of the distribution point computers in your SMS site fails. You replace its hard disk. You reinstall Microsoft Windows NT server with the same configurations that were in effect before the computer failed. You want to restore the distribution point computer so that it functions as it did before it failed.
What should you do?
A.Copy the backup of the master site control file to \Sms\Inboxes\Sitectrl.box\Sitectrl.ct0 on the distribution point computer.
B.Restore the SMS site database to the condition it WAN in before the distribution point computer failed.
C.Choose the option to refresh the packages that were previously created on the distribution point computer.
D.Do nothing. The site server will automatically rebuild the distribution point computer.
Answer: C
QUESTION 66
You create a package to install a custom application. You verify that the package has been distributed to three different distribution points within your SMS site. You then create advertisement for the package that targets a collection. A user attempts to run an advertisement program and the program fails to run.
What is the most likely cause of the problem?
A.The advertisement has been scheduled to run at a future time.
B.The Advertised Programs Client Agent has not been enabled for the site.
C.The user's account or client computer is not a member of the specified collection.
D.A package access account that restricts the user from accessing the package has been specified for the package.
Answer: D
QUESTION 67
You install software metering on Certkiller 's single primary site server. You review the Software Metering Summary. You discover that employees are playing computer games during working hours. You register the computer games by using the Software Metering tool. You enter 0 as the number of licenses. You enable Force real-time license verification. You later find out that the games are still being played. You want to ensure that employees cannot play the computer games during working hours.
Which two actions should you take? (Choose two)
A.Decrease the configuration polling interval used by the software Metering Client Agent.
B.Use Remote Tools to delete the computer game's executable files from the client computers.
C.Run the systems Management program to repair the SMS installation for the client computers that are playing the computer games.
D.Enable Original program name policy in the software metering properties for the site.
E.Enable Enforce the license limits for this product in the registered properties for each computer game.
Answer: D, E
QUESTION 68
You notice that inventory data from a secondary site is not being saved to the SMS database in the primary site. You are diagnosing the problem.
In which sequence should you examine the servers?
A.Distribution point in the secondary site
Secondary site server
Primary site server
B. Secondary site server
Client access point in the secondary site
Primary site server
C.Client access point in the secondary site
Secondary site server
Primary site server
D.Client access point in the secondary site
Distribution point in the secondary site
Secondary site server
Primary site server
Answer: B
QUESTION 69
You want to increase the throughput of site-to-site communications for your SMS site by adding a second Asynchronous RAS Sender. You attempt to install a second instance of the Asynchronous RAS Sender on the site server. You receive an error message.
What should you do?
A.Modify the registry on the site server.
B.Install an Asynchronous RAS sender on another server in your site.
C.Change the schedule of the Asynchronous RAS Sender on the site server.
D.Create a second address for the Asynchronous RAS sender on the site server.
Answer: B
QUESTION 70
Certkiller 's network consists of a single subnet. The accounting department has a small Microsoft Windows for Workgroups peer-to-peer network that uses TCP/IP-32. The Windows for Workgroups computers are not part of your primary site. You want to install SMS client software on all Windows for Workgroups computers. You enable Network Discovery from the site server computer. However, the SMS client software is not installed.
What must you do to correct the problem?
A.Enable Windows NT Remote Client Installation.
B.From a logon point in your primary site, install the SMS client software manually by running the Smsman.exe file.
C.From a logon point in your primary site, install the SMS client software manually by running the Smsman16.exe file.
D.From the site server computer, add one of the Windows for Workgroups computers as a logon point in Windows Networking Logon Client Installation.
E.From the site server computer, add one of the Windows for Workgroups computers as a logon point in Windows Networking Logon Discovery.
Answer: C
0 Comments:
<< Home | << Add a comment